Dicor 551 for trim, it sucks
I bought like 6 tubes to redo my trim and around my front cap on my class c. The original owner used clear silicone on the front cap and it looks horrible. I also have a few crackes/ issues on some ...
Forum Discussion
I make different cuts (angles and opening sizes) on the ends of the tubes for the job. I also use the wet finger and wooded tongue depressors cut at a angle or radius for the job.This eliminates 90% of problems when making an even bead. 10% is pressure within the gun and the amount of material laid down. If using a very small bead of material (1/8"), a wetted plastic spoon is a good tool to spread the material. Remove any material that sticks to the spoon, every foot or so. I have special spreading tools but typically use my finger for most work.
