K3WE wrote:
Dakota98 wrote:
ScottG wrote:
Don't over think this. You don't need fittings, glue or anything else. Just buy the device and it fits over your stack - there's nothing else to buy or be concerned with.
It's easy cheesy.
OP Quote:
PS- NOT putting it on the camper, so please, no replies that it fits the camper vent...I know that much :-) :B
Dakota:
Thank you for your solid reading comprehension skills.
I am constantly amazed at folks who are so cocked and primed to blurt out "follow directions" that they totally miss it when someone's asking something a bit unique.
...and I know I can load it up, go to the store, take it inside, try to make sure that the anti-shoplifting police don't become concerned and try some PVC pipe...
I was just hoping that someone else had done what I'm going to do- use it to vent something OTHER THAN an RV holding tank.
Thanks again Dakota!
I get a little tired of it also.
When I put one on my rig it was a sloppy fit where normal PVC cement would not have worked. I would look at other glues that were thicker if you really wanted a permanent installation. Otherwise the three screws provided will hold it just fine.
