Folding camper table

Dumm Lummox wrote:
Hi, I am looking for some help putting together this folding leg table. As I dry fit the legs in the open and closed position the center support mounts seem to move. Am I missing some parts here or something?

I would say you are missing some screws. Without screws, the center support will move because it can. Put it in the open position and then screw it in place. It won't be able to move after that.

-Michael

Needs 'legs' &/or 'brace' on each end of the table. As stated/shown it is incomplete.

JM2¢ ~~ YMMV

Not sure what you mean by moves. The brace should fold as the legs pivot toward the underneath of the table.

My Aliner had table legs like this but was sold a few years ago so no pictures.

The brace might be on the wrong side of the legs.

Yes... another set of legs. Clearly...

The issue is the center support

Can anyone who has a similar table help me out with a picture of the underside of their collapsible table?

WHAT holds up the other end??? Another set of legs maybe???

Copy the text from the "IMG Code for forums and message board" to your post. (select all the text and then right click and select "copy". Go to your post and then right click and select "paste".

Wondering if I have to rig a sliding center point to make it work.

We bought a 2018 travel trailer that didn't have one.