House Water Pump needs assistance priming
Class A system, 1999 model. The only way I can get the pump to prime is by hooking up a garden hose to my "Sanitize" hookup, run the water very slowly and turn the pump on. It's my understanding t...
Forum Discussion
Pumps are supposed to be self priming.
My suggestion is FILL the on-board tank full.
Turn on pump
Stand on toilet flush pedal (About the biggest water sucker with the possible excption of the shower head)
This releives "head pressure" and makes it easier for the pump to suck water.
Also make sure any pre-pump valves are properly opened or closed as needed.
My suggestion is FILL the on-board tank full.
Turn on pump
Stand on toilet flush pedal (About the biggest water sucker with the possible excption of the shower head)
This releives "head pressure" and makes it easier for the pump to suck water.
Also make sure any pre-pump valves are properly opened or closed as needed.
