The Ready Brake kit is here. I have looked at my options for routing the cable. Anyone mounted a Ready Brake cable in a first gen Honda CRV? Cable routing will be interesting. I have to come around the business end of the engine, avoiding the accessory drive belts and go down under the radiator without touching the exhaust. It will be tight. My other option would be to run under the engine. There's a metal tab welded to the frame under the radiator that I can either use or I'll need to cut off and re-weld another tab. Then it looks like I will need to cut out a piece of the front bumper on the bottom side where it will never be seen. No biggie, I'll figure it out. The breakaway system should be the easy part.