When we are camping local, we take firewood w/ us if allowed depending on where we are staying. I currently load it in tubs in the trailer. The "Better Half" would like it out, I would like a 2500! Lol
My question is IF I buy a set of air bags, then set my hitch up while the bed is empty with the minumum psi in the bags, then load the firewood up, and use the bags to return the rear to the same height as the "no firewood" truck/trailer combo was, will this possibly unload the bars?
I am hoping that if not, I can lower the bags to the minimum psi for the return trip home with an empty bed, not having the wd bars be off at all.
I talked to Reese today and was told that if it's only 100lbs or so behind the axle (usually have maybe 300lbs total-so most would be in front of or directly over the rear axle) that probably wouldn't need the bags, and shouldn't need to readjust the wd bars or dual cam set up with that little weight change.
I would hit the scales to make sure I am still under all the weight ratings if I do this!
Does this sound like a good idea, or starting to "split hairs" to much?
TY!
Chris
