โDec-21-2015 09:59 AM
โDec-24-2015 01:00 PM
โDec-23-2015 11:45 AM
WTP-GC wrote:Johnny_H wrote:
...it is made in Texas and not China as with Yeti and the others.
Not sure where you get your information from:
***Link Removed***
"Our coolers are manufactured in the USA at facilities located in Iowa and Wisconsin as well as at a facility located in the Philippines."
โDec-23-2015 10:39 AM
Johnny_H wrote:
...it is made in Texas and not China as with Yeti and the others.
โDec-23-2015 08:52 AM
โDec-23-2015 08:51 AM
Bumpyroad wrote:
Sam's club carries a Coleman or igloo? knock off. don't see any engineering miracles in a cooler myself. get a cheap Igloo and glue some extra sheets of insulation board on the sides. ๐
bumpy
โDec-23-2015 03:40 AM
minnow wrote:
One can buy a lot of ice for a cheaper Coleman than for a $400 premium priced cooler. Unless you are going to be out in the wilds of the earth and not near a convienance store to buy ice every 3-4 days, I don't see why the average person needs something like this.
โDec-23-2015 02:27 AM
majorgator wrote:
Always love the silly tests that don't take into account real world application. Put those coolers in the sun, on the boat, sloshing around all day in the bed of a truck, and that's your test criteria. There's more to a cooler than just how well it holds ice sitting stationary on a table being opened once every 4 days LOL
.
โDec-22-2015 01:06 PM
โDec-22-2015 10:24 AM
โDec-22-2015 10:15 AM
โDec-22-2015 02:05 AM
Bowfreak wrote:
Good write up. Those reason are the reason we decided to sell Grizzly instead of Yeti...
โDec-21-2015 07:25 PM
CommuterCruiser wrote:
We did a comparison and bought a Grizzly. Here are the posts on my blog concerning the comparison. However, if you don't pre-cool the expensive coolers, you won't get much better life than a cheapo cooler. Just be sure you understand what you're getting before you spend the extra money.
Premium Coolers, Engel vs Yeti vs Yukon vs Grizzly
Also - Revisited After 6 Months ...
โDec-21-2015 06:52 PM
โDec-21-2015 04:06 PM