Atwood furnace model 8536-IV-DCLP control board

1. Are you the original owner?
2. If NOT, then it is possible someone used a water heater module instead of a Furnace module.
3. Look at my link and see if that module looks like yours.
4. If it does then get the model p/n you listed as the wire harness on the Atwood should have enough length to connect.
5. I have NEVER seen a rectangular Furnace module like my link shows, they are all more square than rectangular. Doug

https://www.amazon.com/Suburban-520814-Module-Board/dp/B003G9J4RC/ref=asc_df_B003G9J4RC/?tag=hyprod-20&linkCode=df0&hvadid=312061936460&hvpos=&hvnetw=g&hvrand=7973184298847523275&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9027230&hvtargid=pla-435630308050&psc=1&tag=&ref=&adgrpid=63195598478&hvpone=&hvptwo=&hvadid=312061936460&hvpos=&hvnetw=g&hvrand=7973184298847523275&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9027230&hvtargid=pla-435630308050