Conecting Power For A Front Receptacle?
I researched and found the thread on instaslling a front plug for shore power. I understsand it. Question is how to get lashed up with the current power cord inlet in the rear. I can't see how to...
Forum Discussion
On my trailers I have made many cable runs for one thing or another.
I use the PVC Electrical Junction Boxes and flexible PVC conduit.
These are weather tight and will mount almost anywhere inside or outside.
The PVC Electrical junction box is great for putting up against an outside wall on under the floor and drill a large hole in the center of the box to gain access to the inside of the trailer walls or floors. All seals up great using RTV. The PVC Boxes comes with all different number of ports and conduit size holes. Once in place all seals up tight against with weather tight lids and connections.
You can actually fish new cables through the boxes and lines when you need too.
All items available from LOWES or any of the hardware stores.
Works good for my mods...
Roy Ken
I use the PVC Electrical Junction Boxes and flexible PVC conduit.
These are weather tight and will mount almost anywhere inside or outside.
The PVC Electrical junction box is great for putting up against an outside wall on under the floor and drill a large hole in the center of the box to gain access to the inside of the trailer walls or floors. All seals up great using RTV. The PVC Boxes comes with all different number of ports and conduit size holes. Once in place all seals up tight against with weather tight lids and connections.
You can actually fish new cables through the boxes and lines when you need too.
All items available from LOWES or any of the hardware stores.
Works good for my mods...
Roy Ken
