Confused about different Tireminder systems
Getting ready to start Rv'ng in a few weeks. Decided it would be a good idea to get a tire pressure monitoring system. Pretty sure we're going with the Tireminder system. I'm just a little confused ab...
Forum Discussion
Thanks for all the advice. We went with the TST 507 flowthru's. Just got them in the other day. Now, I have a couple of other questions. Actually it's three.
What is the variance you use between your low and high PSI? My tires are "E" rating at 80psi. Would I use a 10% variance?
I have seen some talk(I think mostly about the tire minder system) about having to have brass valve stems because of the weight of the sensors. What about the 507's? Hopefully, I don't need to change my valve stems.
Last question...the high temp is preset at 158 degrees. I think that the TST is normally for semi's. Would the temp rating be the same for RV tires?
Ok, that's all. Any help would again be appreciated.
Connie and Bruce
the Lost Travellers ( or it it one "L"?)
What is the variance you use between your low and high PSI? My tires are "E" rating at 80psi. Would I use a 10% variance?
I have seen some talk(I think mostly about the tire minder system) about having to have brass valve stems because of the weight of the sensors. What about the 507's? Hopefully, I don't need to change my valve stems.
Last question...the high temp is preset at 158 degrees. I think that the TST is normally for semi's. Would the temp rating be the same for RV tires?
Ok, that's all. Any help would again be appreciated.
Connie and Bruce
the Lost Travellers ( or it it one "L"?)
