Forum Discussion
Old-Biscuit
Aug 04, 2019Explorer III
P3 connector
Pin 1 ---White Wire----GROUND
Pin 2 ---Yellow Wire---12V DC+ to gas valve solenoid AND reignitor controller
Pin 3 ----empty
Pin 4 ---Blue Wire---TEST Port (used to test that circuit board is sending DC Voltage to gas valve/reigniter
Dino Board
THREE different boards
Check which Dometic Board you have then pick the right Dino
Dino boards for RM2652
Pin 1 ---White Wire----GROUND
Pin 2 ---Yellow Wire---12V DC+ to gas valve solenoid AND reignitor controller
Pin 3 ----empty
Pin 4 ---Blue Wire---TEST Port (used to test that circuit board is sending DC Voltage to gas valve/reigniter
Dino Board
THREE different boards
Check which Dometic Board you have then pick the right Dino
Dino boards for RM2652
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,211 PostsLatest Activity: Mar 08, 2025