How Best To Charge My Battery
I have a single group 27 battery. I have a Honda eu1000i generator. My trailer came with a parallax 7155 converter. I want to upgrade to a Progressive Dynamics PD9260CV converter. Will making t...
Forum Discussion
The wrong size/part was totally my fault. I ordered wrong. Thankfully, I continued asking here and then wrote to the manufacturer. It was a simple return to Amazon and they are already processing my refund.
I found it funny that the FULL power center was $146 and just the converter/charger was $205. Oh well.
Here is the (almost) finished product (need to put on the cover, but it's 95 in there...I need to cool off.)
Oh, another question - can those coated wires (mainly the red one toward the center) safe touch the coil thing with the copper wire wrapped around it (I'm assuming that's a large capacitor??)
I found it funny that the FULL power center was $146 and just the converter/charger was $205. Oh well.
Here is the (almost) finished product (need to put on the cover, but it's 95 in there...I need to cool off.)
Oh, another question - can those coated wires (mainly the red one toward the center) safe touch the coil thing with the copper wire wrapped around it (I'm assuming that's a large capacitor??)
smkettner wrote:
The 4645 will operate just fine without the pendent. You can still tell what charging mode it is in (boost, normal, float) with a voltmeter. You just cannot change the mode manually and you may never need to change modes. Might leave that project for another day.
Or find out why you were sent the wrong size.
