manual refeer lighting problems on lp
Have a 185RB Jayco. Had refer chimney cleaned last fall, lit good, Now while holding in gas button and clicking igniter, the gauge on front moves over to the green but no further. Let go of gas buuton...
Forum Discussion
How LONG are you holding the button in when the green indicator is showing. I have found, that you may have to hold it up to a minute. If so, then the Nut on the Thermocoupler is NOT tight. Usually, just a 1/4 turn on the nut will restore the millivolt connection. You do have to partially pull the refer to do this. Doug
