NEED ASSISTANCE... ATWOOD AFMD FURNACE
I have a 2018 class A gas unit with an Atwood afm series furnace. My problem is that it was sooting up and smelling, even to the point of sounding off the CO alarm. I thought I had a dirt dauber probl...
Forum Discussion
There are 3 wires and a multiwire quick connect on the Circuit board
1 wire is the spark ignitor wire and is distinctive from the piezo tower to the burner
the other 2 wires are for the Fan Motor relay and the spade terminals are different sizes and CANNOT be attached wrong
the multi quick connect only fits one way.
So, your Circuit board is connected correctly.
1 wire is the spark ignitor wire and is distinctive from the piezo tower to the burner
the other 2 wires are for the Fan Motor relay and the spade terminals are different sizes and CANNOT be attached wrong
the multi quick connect only fits one way.
So, your Circuit board is connected correctly.
