Ron Nielson wrote:
Yes, the picture is the exact number of the board in my trailer. I got the number from the board, went to Amazon, selected the board and put in in the cart, then marked it 'save for later'. I did not check to see the labeling of the relay, k1 k2 etc to compare to the picture or a wiring schematic. The trailer is a 2009 model but was built in 2008, August, IIRC.
Do you want me to remove the board cover so that I can visually see the board? Maybe I'm looking at the wrong relay?
Here's an Omron replacement available (but backordered a little) on digikey. It has the same footprint, 5VDC coil voltage and current as the Goodsky one. The only difference is a 16A AC contact rating instead of 15A (more is better but the contact need only support a couple amps for the heater anyway.
http://www.digikey.com/product-detail/en/G5LE-1A-E-36%20DC5/Z5217-ND/1815659Here are the two datasheets for reference:
Omron datasheetGoodsky datasheetApparently Norcold did change the board design some so the schematics I linked may be off a little. The manual I found has a 16-pin connector which apparently they changed to separate 10-pin and 6-pin ones in recent designs. If your board matches the Amazon one, the Omron relay will work.
