On the road, battery and charging problems
A bit of a long story. I am stumped, but can't (unwilling) to do too much on the road. In Feb, I bought and installed 2 6V AGM GC2 Lifeline batteries. At home, plugged into 30 amp circuit, my Zamp ...
Forum Discussion
Thanks all! Yes I have a multimeter. I checked voltage at the battery while installed inthe trailer and got 12.3v. I attached the external charger and got 12.3v. The monitor also said 12.3. That implies my charger went bad at basically the same time as the converter/charger. Crazy.
Right now I have the 2 6v batteries connected in series separate from the trailer with the external charger on it. I hope they will charge normally. Then I can swap with the 12v and repeat the process.
Also today I had the external charger on the 12v while installed in the trailer. When I returned to the trailer the charger read "bad bat" But it is brand new.
I am pretty busy the next 2 days but will try to report back. I also trying to schedule a mobile tech for Monday or Tuesday at my next stop.
Cheers
Right now I have the 2 6v batteries connected in series separate from the trailer with the external charger on it. I hope they will charge normally. Then I can swap with the 12v and repeat the process.
Also today I had the external charger on the 12v while installed in the trailer. When I returned to the trailer the charger read "bad bat" But it is brand new.
I am pretty busy the next 2 days but will try to report back. I also trying to schedule a mobile tech for Monday or Tuesday at my next stop.
Cheers
