Paneling catching on slide
I have a 1999 Harney Renegade DP. Slide in family room with kitchen on it. The paneling on the wall adjacent to the slide appears to have come loose, and the slide caught it, bending it, and making ...
Forum Discussion
When the trim around the edges of our slide started binding and pulling loose I used a saw to cut the bottoms off.
I then discovered that the cause of the issue was that the rollers under the slide were wearing out which caused the slide to drop shift and bind.
Trimming the wood wasn’t necessary , replacing the rollers solved the problem and reattaching the loose trim required double sided carpet tape to hold it in place.
I then discovered that the cause of the issue was that the rollers under the slide were wearing out which caused the slide to drop shift and bind.
Trimming the wood wasn’t necessary , replacing the rollers solved the problem and reattaching the loose trim required double sided carpet tape to hold it in place.
