Poly Welding / Repair Cost
Background: Found that my new (to me) TT's water tank had a leak at the tank drain. I was hoping it was just a loose fitting but closer inspection revealed a crack in the welded-in fitting that the ...
Forum Discussion
Thanks for the input everyone. The tank is polyethylene as far as I can tell. I had seen Happy Trails webpage, but they're a good 4+ hour drive (each way) from me.
After looking at a few YouTube videos and taking a closer look at the crack, I think that if I can't find a reasonable repair person fairly close by, I'll try the HF "welder" and see how it goes.
After looking at a few YouTube videos and taking a closer look at the crack, I think that if I can't find a reasonable repair person fairly close by, I'll try the HF "welder" and see how it goes.
