Problem with Atwood furnace
Hi everyone. I have an Atwood 8516DCLP in my 1999 Alaskan Camper that worked wonderfully, but then all of a sudden stopped firing up. Fan would blow (common thing with the circuit board it has) but no...
Forum Discussion
ScottG wrote:I'm going to agree with this guess. As to why the insulation damage stops at the clamp, the wires get bundled tightly there allowing greater heat transfer from the yellow wire to the others. I've been having an ongoing high resistance problem with my water pump power running through a similar molex connector.
High resistance at the molex connector.
