Samlex Inverter Power Draw Question
I just finished a Samlex pure sine wave PST 3000-12 inverter install. I ran 00/2 cables because that was recommended in the user manual. I added a Renogy 30 amp transfer switch with the charger wired ...
Forum Discussion
The inability to charge them below freezing is a problem. 32° is not that cold in CO. I’ll have to remember to turn off the charger at night or unplug in colder weather while we are still using the RV. I’m considering a seat warmer for the battery compartment. I used them on my old RV as tank warmers.
I think part of the complexity is getting good specs. A reliable BMS from the manufacturer is based mostly on company reputation. It remains to be seen if I get more value from these batteries than from my rocky history with SLA and AGM’s
The idea of replacing the micro with a low draw is interesting. The one I have is rated at 900 watts (1.35 kw power consumption) but from the inverter it drew much more. I could try it at 50%.
I like the idea of running a more disposable appliance like one of my small heaters. Cheap and disposable if it breaks. Thanks.
I think part of the complexity is getting good specs. A reliable BMS from the manufacturer is based mostly on company reputation. It remains to be seen if I get more value from these batteries than from my rocky history with SLA and AGM’s
The idea of replacing the micro with a low draw is interesting. The one I have is rated at 900 watts (1.35 kw power consumption) but from the inverter it drew much more. I could try it at 50%.
I like the idea of running a more disposable appliance like one of my small heaters. Cheap and disposable if it breaks. Thanks.
