Samlex Inverter Power Draw Question
I just finished a Samlex pure sine wave PST 3000-12 inverter install. I ran 00/2 cables because that was recommended in the user manual. I added a Renogy 30 amp transfer switch with the charger wired ...
Forum Discussion
Yours is not a surge problem - inverter and generator output decreases with higher ambient temps, while Air cond begins to present an even larger load… Attempting to run a microwave (or air cond) and charger at the same time overwhelms the 20a circuit…A hybrid type (load sharing) inverter may make the difference…Another tip, get rid of power sucking stick house microwave or consider a stay at Embassy Suites…
3 tons
3 tons
