Schwintek slide top/bottom alignment
Hello, I recently purchased a used Shadow Cruiser TT and after a few trips I am having an issue with the slide. When putting it out, the top goes all the way out but the bottom does not. Its about 1...
Forum Discussion
Your right, there isn't much on aligning it top to bottom out there.
If it were me, I would loosen and drop the motors on each side. Then push or lift the slide into proper position and reinstall the motors.
Don't forget to always hold the button for 3 to 5 seconds after the slide stalls when either extending or retracting it so it stays in time.
If it were me, I would loosen and drop the motors on each side. Then push or lift the slide into proper position and reinstall the motors.
Don't forget to always hold the button for 3 to 5 seconds after the slide stalls when either extending or retracting it so it stays in time.
