Forum Discussion
abom2
Nov 03, 2017Explorer
It is a Cambell-Hausfeld horizontal. It barely clears the storage opening vertically but it has done what I have needed from it. I had to spend a bit of money on the air driven tools. The more inexpensive ones I have had for years would hardly work. The ones that will work at a lower CFM ask a fair amount more of money.
I wish that the cordless technology at the time was were it seems to be today. With the cordless impact guns that state they can be used on lug nuts.
I can get mine loose with my current setup but it will not drive the nut to full torque. It gets close but I use a 3ft breaker bar for the last little bit, then check with my torque wrench.
I wish that the cordless technology at the time was were it seems to be today. With the cordless impact guns that state they can be used on lug nuts.
I can get mine loose with my current setup but it will not drive the nut to full torque. It gets close but I use a 3ft breaker bar for the last little bit, then check with my torque wrench.
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,191 PostsLatest Activity: Jan 19, 2025