Slide out.
I have one slide that seems to operate slower than it used to. New battery fully charged, disconnected and cleaned all electrical connections at the circuit breakers on the tongue, cleaned and conditi...
Forum Discussion
ken56 wrote:
Well I have not waxed the side walls as yet. The baby powder or talc seems to make some sense also. Replacing both circuit breakers will be the last thing I do. Will the circuit breakers show a lower voltage from one side to the other? I did not check that so I suppose I can do that also. They are only 4 years old.
I did not say the slide was gear driven but yes, it is a gear driven slide. The other 2 slides are cable driven and seem to work fine so that leads me to believe it's drag related. Waxing will commence shortly.
Don'forget to get the inside wipers as well....
