Sticky hydraulic levelers
The levelers on my class A work well except when it time to pack up and leave. Often 1 or 2 will stay down. I now carry a 6 foot 2x4 and a wood block to push them back into the stored (up) position. E...
Forum Discussion
You need to spray the shafts with WD40 and then run the levelers up and down a couple of times. HWH now recommends this cleaning any time one of their levelers becomes sluggish. Also on a 11 year old system I would say the springs are getting weak and need replacing if that hasn't already been done.
