CJW8 wrote:
What huntindog said or... Get this kit from MORyde. It is a cross member kit. Mount the shocks between the crossmembers and the axles... on the inside of the springs. It looks like these crossmembers go between the spring hangers so there would no removal or cutting of the underbelly needed. All concerns addressed!
I know about the Mor/ryde crossmember, It's not for mounting of shocks. It's to reduce lateral movement of spring hangers during turns. Some have made those up themselves and is not a difficult job is you can weld. I know someone who did that and is not happy with unexpected effects of using it.
