What is this electrical component?
I have been working on a Kwikee step that won't retract when the engine starts. I finally traced it down to what I thought was just a wire pulling out of a butt connector. That thread is HERE. I bo...
Forum Discussion
OK, I ordered a pack of 10 of the 1.2 kohm, 2w resisters 1% tolerance, for $1.99. I paid an extra $2 to expedite the shipping. Hopefully, it will get here before it is too cold to crawl under the RV to install.
If I can get the wiring harness from Winnebago, well, I just wasted $4. I'll learn to live with it.
If I end up installing a resistor, I will solder it inline with some 14g wire, and heat shrink it to waterproof it. Then I will use 2 weatherproof butt connectors to connect it to the existing wire ends.
If I can get the wiring harness from Winnebago, well, I just wasted $4. I'll learn to live with it.
If I end up installing a resistor, I will solder it inline with some 14g wire, and heat shrink it to waterproof it. Then I will use 2 weatherproof butt connectors to connect it to the existing wire ends.
