Jul-15-2024 04:24 PM
Why is my Ryobi inverter generator 2300 bta overloading as soon as its started with nothing plugged in , also I noticed that the display indicates that its pulling more watts to run the same load that it was previously using less watts to run I have replaced the carb, sparkplug oil ,fuel filter air cleaner problems is still present I have not changed the stepper motor however I did check it with a multimeter continuity was good reset button also working any suggestions
Jul-22-2024 03:39 PM
Nothing plugged into the generator and says overloaded? Seems like an internal short or internal electrical control issue.
Probably needs a pro to look at it or if new a warranty adjustment.