Your opinion of Battery Desulfators
Hi All - A while back, only a couple of months after I installed my 2 GC2 245 AMP hour batteries and solar panels, I had an accidental removal of the breakaway pin which caused our 5th wheel brakes to...
Forum Discussion
No way I can ethically duck this :(
I am the guilty party.
Go to eBay
Get the stuff coming. We will converse by email with photos. Perhaps Landyacht can join in. I write exquisitely detailed instructions with photos, hints and tips.
I don't bail-out on promises, so I will fulfill my obligation that I wrote about, and I'll be smiling the whole time.
I am the guilty party.
Go to eBay
- SEARCH TERM 10 turn 200 ohm BOURNES potentiometer
- No sense in going 300 ohm you'll never need less than 11.8 volts
- Get the potentiometer
- Order a 1/4" shaft plastic KNOB
- SEARCH TERM "Helping Hand or THIRD HAND" adjustable alligator clips
- STRONG reading glasses 4.0 diopter
- 30 watt soldering iron or 120 watt solder gun
- 60/40 or 63/37 lead solder
- Duplex wire (how long do you need?)The wire MUST be very small size, 20 or 22 gauge
Get the stuff coming. We will converse by email with photos. Perhaps Landyacht can join in. I write exquisitely detailed instructions with photos, hints and tips.
I don't bail-out on promises, so I will fulfill my obligation that I wrote about, and I'll be smiling the whole time.
