1972 Amerigo Camper Rebuild

ticki2 wrote:

JoeChiOhki wrote:


You know anyone who's got parts for the jalousie windows crank mechanism? The handles spin, but the windows don't open.

It helps f you can determine the brand of window .
http://www.pellandent.com/RV_Products_List.aspx?CategoryID=305

It took a while to get to where I can actually address this, but they sadly don't carry them.

From my research, I have determined that Gardner Inc. used Barton-Kramer Window for the Jalousie Windows found in all of their rigs.

The company is mercifully still around, and the torque operators for these windows are still in their catalog.

The part these use is the 274R and 274L model crank mechanism.

#274L Side Mount Torque Operator

#274R Side Mount Torque Operator

The Right-hand units can be located on Home Depot, so at least there's an easily found supplier for those, however, the left-hands are more difficult to locate.

For anyone with an Amerigo that has these style of tail light:



Grote RV Part supply makes new ones, the part number is 51242 and you can find it on Amazon.com :).

I ended up looking for new ones as both my tail light housings had cracks in them.

Wagonqueen Truckster wrote:


Entrance side of the rebuild is complete...including the 13 foot long 2-6 support beam. Here is a pick of the "newly" supported over the cab bed. Tomorrow we rip open the drivers side of the camper.

Working on the cabover myself right now, I don't know how they ever thought the factory design for supporting the front half of the bed was a good idea.

Hey, Cwinhard, any progress on yours?

cwinhard wrote:
Officially a part of the Amerigo clan, too.
And most likely the one with the longest distance from the original manufacturing site: I'm in Germany.

Bought this baby a couple of weeks ago and gettin' ready for a full restoration over the next months.

The snap-n-nap was missing, so need to rebuild that from scratch. Thanks to Wagonqueen I've got plenty of helpful information over the last weeks.

Biggest challenge for the moment are the jacks: Stay with the original ones and add a fourth for stability plus some custom system for the front jacks so I can pass them with the Dually or go for Rieco Titans and build some custom brackets... Any suggestions?

Will keep everyone posted.

Thanks,

Claus

Welcome to the clan :)!

On the jacks, personally its your own preference and how much you plan to use the camper off the truck. I take my campers off fairly regularly, so I'm going with standard jacks.

The last owner on mine made custom corner mounts so that standard jacks could be attached on the front, and I'm taking mine down to a welder buddy to make some custom mounts for the rears so I can transfer my electric jack system from the KIT onto the Amerigo.

Officially a part of the Amerigo clan, too.
And most likely the one with the longest distance from the original manufacturing site: I'm in Germany.

Bought this baby a couple of weeks ago and gettin' ready for a full restoration over the next months.

The snap-n-nap was missing, so need to rebuild that from scratch. Thanks to Wagonqueen I've got plenty of helpful information over the last weeks.

Biggest challenge for the moment are the jacks: Stay with the original ones and add a fourth for stability plus some custom system for the front jacks so I can pass them with the Dually or go for Rieco Titans and build some custom brackets... Any suggestions?

Will keep everyone posted.

Thanks,

Claus

Wagonqueen Truckster wrote:
Mine was put back in when my snap n nap was rebuilt with your typical butyl tape. The seal around the actual moving part off the window leaks due to shrinkage. I just used a clear silicon caulk to fill in some if the voids.

Yeah, that's the bit I was wondering about. Looks like I shall be buying a roll of auto weather stripping and seeing if I can use that to get the window to seal up when shut :).

ticki2 wrote:

JoeChiOhki wrote:


You know anyone who's got parts for the jalousie windows crank mechanism? The handles spin, but the windows don't open.

It helps f you can determine the brand of window .
http://www.pellandent.com/RV_Products_List.aspx?CategoryID=305

I'll have to see if I can find any info on the windows. The KIT was easy, it had Hehr brand, but I don't know right off the top of my head if the Amerigo used the same brand.

JoeChiOhki wrote:


You know anyone who's got parts for the jalousie windows crank mechanism? The handles spin, but the windows don't open.

It helps f you can determine the brand of window .
http://www.pellandent.com/RV_Products_List.aspx?CategoryID=305

Mine was put back in when my snap n nap was rebuilt with your typical butyl tape. The seal around the actual moving part off the window leaks due to shrinkage. I just used a clear silicon caulk to fill in some if the voids.

Wagonqueen Truckster wrote:
Goog luck. I pray yours needs only minor restorations.

You know anyone who's got parts for the jalousie windows crank mechanism? The handles spin, but the windows don't open.

Also, what did you use to re-seal the snap-nap's window? The last owner just caulked it shut tight because the seal was shot, but I'd like to put it back into service.