Arctic Fox 996 Slide out issues
Apparently there are issues with the bottom of the driver side/kitchen slide outs. The rollers are digging into the plastic that covers the wood bottom of the slide. I read about this on another...
Forum Discussion
bighatnohorse wrote:
I wonder if the rollers are digging in because they don't always roll? A roller like that looks like it could use a little lubrication.
I checked before I did the plate install,and they were rolling. I also sprayed on some 3M Teflon spray so that may have helped.
Here is the passenger side/dinette picture for a visual reference. Not sure why they did the kitchen with rollers, the only reason I can see is that because the kitchen slide does not go out as far as the dinette side, they thought it might not warrant it.
As long as it works, I am OK with it.
Jerry
