Forum Discussion

Arcamper's avatar
Arcamper
Explorer
Oct 23, 2015

Enough with the recalls

Well for 5 weeks in a row now I have gone out to the mailbox and each week had a recall notice on my truck. Security recall, drivers airbag, passenger airbag, steering wheel harness and now steering box plate welds. I was about to make an appointment to take it in but I think I should wait another couple of weeks and see what else comes in. This truck has been perfect since day one plus it drives and tows like a dream so I hope it stays that way and yes its a Ram. But don't puff your chest out if you have something else because I work with a guy that has a new Ford F-350 and he is going through the same thing. I guess none of them can get it right the first time anymore.
Tow Vehicles
  • blofgren's avatar
    blofgren
    Explorer
    Oct 29, 2015
    The Mad Norsky wrote:
    blofgren wrote:
    I think that's true on the earlier models and the lower trim levels but my truck is a Laramie and has Alcoa aluminum alloy wheels on the outer rear tires and fronts, and has steel wheels on the rear inners. So that may be an issue with the simulators but not with these trucks. It is a real annoying problem, though.



    :h just thinking (and I know how dangerous that can get for me :B )

    but, is it possible to have a wheel out of round or something along that line of thinking causing the problem????????


    I have wondered about that too; thank you for your thoughts :B

    I think at this point I need to take it to a good tire shop myself and have all the tires road force balanced. If they can successfully do this then the problem should be eliminated. If they can't then hopefully they can advise me whether one tire/wheel is the problem or they all are; then I can go back to the dealer loaded with better information.
  • The_Mad_Norsky's avatar
    The_Mad_Norsky
    Explorer
    Oct 29, 2015
    blofgren wrote:
    I think that's true on the earlier models and the lower trim levels but my truck is a Laramie and has Alcoa aluminum alloy wheels on the outer rear tires and fronts, and has steel wheels on the rear inners. So that may be an issue with the simulators but not with these trucks. It is a real annoying problem, though.



    :h just thinking (and I know how dangerous that can get for me :B )

    but, is it possible to have a wheel out of round or something along that line of thinking causing the problem????????
  • Cummins12V98's avatar
    Cummins12V98
    Explorer III
    Oct 29, 2015
    I put a set of 3rd gen take offs I installed on my 98. They were aluminum with a stainless clad cover. They were awesome!
  • mkirsch's avatar
    mkirsch
    Nomad II
    Oct 28, 2015
    mich800 wrote:
    Oasisbob wrote:
    A salesman told me they figure in recalls when calculating what the MSRP will be.


    Than it must be true. All the automobile sales people have a direct line to the finance side of corporate on how they calculate product costs. But I know you were just kidding just did not see the :)


    What do you mean? Logically they would HAVE to figure in the cost of recalls, or else they would go broke! The manufacturers have to get the money from *SOMEWHERE*. They're in the business of selling cars, so where do you think that somewhere is?
  • NC_Hauler's avatar
    NC_Hauler
    Explorer
    Oct 28, 2015
    shepstone wrote:
    Hey Man, Wishing you the best.


    Thank you very much.

    Jim
  • NC_Hauler's avatar
    NC_Hauler
    Explorer
    Oct 28, 2015
    blofgren wrote:
    I think that's true on the earlier models and the lower trim levels but my truck is a Laramie and has Alcoa aluminum alloy wheels on the outer rear tires and fronts, and has steel wheels on the rear inners. So that may be an issue with the simulators but not with these trucks. It is a real annoying problem, though.


    Same here with wheel set up, outside 4 are Alcoa aluminum,inside rears are steel.
  • blofgren's avatar
    blofgren
    Explorer
    Oct 28, 2015
    I think that's true on the earlier models and the lower trim levels but my truck is a Laramie and has Alcoa aluminum alloy wheels on the outer rear tires and fronts, and has steel wheels on the rear inners. So that may be an issue with the simulators but not with these trucks. It is a real annoying problem, though.
  • shepstone's avatar
    shepstone
    Explorer
    Oct 28, 2015
    blofgren wrote:
    The Mad Norsky wrote:
    Cummins12V98 wrote:
    NC Hauler wrote:
    Cummins12V98 wrote:
    blofgren wrote:
    I have all of the recalls too and the track bar one just came this week. I have looked at the welds and they look just fine so I am not at all worried about it. I'm thinking it may have affected a small amount of trucks because I have yet to read about anyone with poor welds.

    I too am OK with the fact that they are making good on potential issues. I absolutely love the truck so I can live with it. I am still not happy about the vibrating POS General tires though....:M


    Just bite the bullet and throw on a set of MS2's!

    So far no recalls on my 15. Maybe 3rd year is a charm.



    It's really weird how some of these trucks act with same tires..I too have OEM Generals on my truck and have never had a vibration or wobble issue..I've heard complaints about these tires, but also other popular brands...Guess I've been fortunate.


    EXACTLY! My Dad's 12 LongHorn Dually 2wd has the Generals and at 25K his are wearing good. No rime or reason to it.


    X 3 for mine, also Generals on it. Wearing extremely well.


    Mine are wearing really well too. The issue is that they vibrate like h*ll over about 65 mph. I usually tow around 62 mph so the issue isn`t as noticeable but drive the truck itself over that speed and there it is. I have been pricing out a new set of MS2`s and will probably bite the bullet and do it sometime this winter but I`m not happy about having to shell out the $ this soon after buying such an expensive vehicle. We have been looking at newer Acura MDX`s for my wife and low and behold, they come with Michelins from the factory as did her 2005.


    I read that the Laramie chrome wheels are actually covers, and one owner seems to think that dirt gets in between the cover and the steel wheel and causes them to go out of balance. Could this be true?

About Travel Trailer Group

44,025 PostsLatest Activity: Feb 06, 2025