Forum Discussion

rrev's avatar
rrev
Explorer
May 13, 2013

eternabond question

I was up on the roof today after getting back from a wonderful weekend camping. When I was getting ready to wash it off when I noticed a crack. It's right on the edge where the roof goes from horizontal to vertical on the side. My question is, I know that the Eternabond is the way to go but my question is that does the Eternabond going to work to bend 90* or what should I use?
  • Old-Biscuit's avatar
    Old-Biscuit
    Explorer III
    May 13, 2013
    Had a similar small tear.
    Cleaned it up and used Eternabond to repair.
    That was 5 yrs. ago......no problems

    Key is a good clean dry surface and then use a roller to bond it to roof.
    I used a wall paper roller.

    It will stick to anything...except silicone!!!!
  • Drum's avatar
    Drum
    Explorer
    May 13, 2013
    Make sure to do it right the first time. It's a bear to remove. Ask me how I know.
  • rrev's avatar
    rrev
    Explorer
    May 13, 2013
    Thanks for the info. I've got some coming. I think I'm going to do a strip over the edge on the length of both sides to help reinforce. There were a couple of spots that looked like they could be suspect to future problems. I'm sure glad I got up there and looked around. Last thing I need is to have a ruined roof or water damage.

About Travel Trailer Group

44,029 PostsLatest Activity: Jan 13, 2025