Fixing AC polarity issues.
I acknowledge that many of you will never have the need to do a modification like this one to your TC. If you only connect to mains power at your home or at an established RV park, you will most likel...
Forum Discussion
msiminoff wrote:Gripnriprod wrote:
So, where in the circuitry did you place the DPDT switch?
The DPDT switch is in the mains cord... before the inverter/charger. The circuit tester is wired to the input of the switch, so it will indicate an issue prior to me turning it on.
Yes of course, this does mean that I am responsible for placing the switch in the center (OFF) position prior to plugging in the cord to mains power, but this is still a big improvement over the setup I previously had.
Here's a simplified wiring diagram;
It was not apparent to me at first that your switch had a neutral position, but electrical is not my native language.
A concern I have is the ease of access to your switch. If I were a curious 12 year old, I would flip the switch to see what happened. :E
Another solution might be to carry a well marked reverse polarity extension cord about 1 foot in length. Deploy only when needed.
