Fresh water tank drain valve issue
The handle on the plastic drain valve broke, so I need to replace the valve. I removed the two screws from the valve and pulled the valve out from the tank about half an inch. I can see there is tubin...
Forum Discussion
The problem is that when I pull on the valve I can see just a small amount of the tubing (the tubing is cut at an angle a bit, so I can just see a little part of the end of the tubing) and when I try to pull on the valve the end of the tubing gets hung up on the tank opening. If I could get the tubing through the opening I could then clamp onto it. Main question/uncertainty is what would be the consequences of having the tubing separate from the valve and the tubing stay in the tank. Thanks.
