How to remove pedestal leg from Lance Camper 825 dinetter

[Rom100423]

Does anyone have any tips for how to remove the table leg from the under side of the dinette table of a Lance 825 camper? It says push or pull and twist, and with all my weight on it I could get it to twist about 90 deg, but it still didn't come out...Help!

[K_Mac]

I'd use a plastic thick walled pipe (sewer/schedule 40) over the pedestal leg. Wider in my opinion will put less stress on mounting screws.

[Fisherman]

wnjj wrote:
If it’s just a wedge fit and the table leg is hollow, find a board (2x2?) that will fit down inside the table leg and use it like a battering ram to drive the table off.

Yup, give her a couple of good wacks and the battering ram will come out the top of the table.

[wnjj]

If it’s just a wedge fit and the table leg is hollow, find a board (2x2?) that will fit down inside the table leg and use it like a battering ram to drive the table off.

[pasusan]

WD-40?

[mike_kellie]

Maybe move this over to the truck camper forum. There is a large audience of Lance owners there. Hope that helps.