Installed a Micro-Air Soft Start today
So there's a backstory first --- When I bought my 1160, I got it 6mos old used. Original owner bought it stripped - no AC, no gen, not even any TVs. I got a helluva deal on it, and first thing I d...
Forum Discussion
The Micro-air soft start is more than just a bigger "hard start" capacitor. Here is my install on a Dometic Penguin 11.5k unit.
This is the brains of the system. It learns from each successive start for the first few starts of the compressor and creates a custom profile for your air conditioner. I watched our battery monitor and the spike in wattage did decrease with each start through our inverter.
Because this module was too big to fit where the old removed start capacitor was located they have you mount it on the opposite side of the unit and a cable bundle crosses over back to the air conditioners electrical circuits.
Old start cap removed.
New wires routed in. And connected.
The company is great to deal with and they have detailed installation instructions for specific air conditioner units online. I had a couple questions that they answered very quickly vis e-mail. The install was pretty easy. If you have basic wiring skills you can do this yourself. If your smaller generator is having a hard time bumping the condenser give one a try.
This is the brains of the system. It learns from each successive start for the first few starts of the compressor and creates a custom profile for your air conditioner. I watched our battery monitor and the spike in wattage did decrease with each start through our inverter.
Because this module was too big to fit where the old removed start capacitor was located they have you mount it on the opposite side of the unit and a cable bundle crosses over back to the air conditioners electrical circuits.
Old start cap removed.
New wires routed in. And connected.
The company is great to deal with and they have detailed installation instructions for specific air conditioner units online. I had a couple questions that they answered very quickly vis e-mail. The install was pretty easy. If you have basic wiring skills you can do this yourself. If your smaller generator is having a hard time bumping the condenser give one a try.
