Lance TC "wing" construction?
I bashed in the wing area of the passenger side of my Lance 845 (see pic). Is there any sort of wood framing between the aluminum panel and inside wood panel? Or, is it just "empty"? Thanks...
Forum Discussion
Not too bad to undertake as a repair. Rather than try and replicate the staples I used a Kreg jig and pocket screws and waterproof glue. Two fun discoveries. 1) the drain petcock has virtually no slack and the hole which looks like it was done with a hammer and box cutter make it very tricky to get the spigot reclamped. 2) on the inside of the wings of my 845 some type of vinyl coated luan was used. Fortunately I was able to gently peel the delaminated luan off the plastic sheet/film.Took a Saturday and part of a Sunday to do both wings. One of the oscillating saw blade multi-tools helps a lot. Good luck.
