Mini Maxx - 2012 Ram 2500

My Bully Dog GT does the same thing from time to time. It seems to be heat related. Mine is mounted on the dash in the sun so when the truck is outside is when it does it. If possible try unplugging it and putting it away when it's hot and sunny.

Interesting. I'll have to pay attention to the temperature. I'm pretty sure it's done it when it's cooler, but we'll see. I have it back at the shop again for them to try and figure it out.

Off topic, but I am not a big fan of H&S Mini Maxx. Left many any of friends, family, and customers with blown head gaskets if the boost and injection timing is too aggressive and you don't have head studs installed. The other minus is that it doesn't tune the trans to handle the added power reliably like EFI Live, EZLynk, or MM3 does.

Thanks for the comment. If we keep having issues we talked about switching to something different but don't know what's better. Have you heard of blown head gaskets on the 6.7 cummins?

Yes, especially with tuners like the H&S or Smarty. If you are running aggressive timing with high boost and you don't have head studs, then a head gasket replacement will be in your future. The software on these tuners do not have as many capabilities to smoothen out injection timing like the modern tuners do.

You can read why here....

EFI LIVE TUNING: THE DIESEL INDUSTRY’S MOST POWERFUL TUNING TOOL

Thanks for the info. I really enjoy Performance Mode, but maybe I should take a break from that. Lol.

H&S has made my cousin a lot of money out warranty engine and transmission repairs. Crazy thing is the dealer doesn't install head studs and some customers will still run this stuff because their truck is deleted

ShinerBock wrote:
Off topic, but I am not a big fan of H&S Mini Maxx. Left many any of friends, family, and customers with blown head gaskets if the boost and injection timing is too aggressive and you don't have head studs installed. The other minus is that it doesn't tune the trans to handle the added power reliably like EFI Live, EZLynk, or MM3 does.

Can't tune the aisin so what do you suggest for my 16 Cummins? I'm talking to Calibrated Power through emails now about it. I've run my 2005 on extreme 100 % of the time towing heavy or not close to 10 years now and the engine has never had a hiccup and the stock factory trans is still pulling great but I've heard the aisin dont like added power.

transamz9 wrote:

ShinerBock wrote:
Off topic, but I am not a big fan of H&S Mini Maxx. Left many any of friends, family, and customers with blown head gaskets if the boost and injection timing is too aggressive and you don't have head studs installed. The other minus is that it doesn't tune the trans to handle the added power reliably like EFI Live, EZLynk, or MM3 does.

Can't tune the aisin so what do you suggest for my 16 Cummins? I'm talking to Calibrated Power through emails now about it. I've run my 2005 on extreme 100 % of the time towing heavy or not close to 10 years now and the engine has never had a hiccup and the stock factory trans is still pulling great but I've heard the aisin dont like added power.

The combination of a VG turbo that creates high drive pressure and the longer stroke of the 6.7L makes it a lot easier to blow a head gasket with aggressive timing and boost. Heck even in stock form this happened until Cummins reprogrammed the engine to not create so much low rpm cylinder pressure. The new ECM's of the 2013 and up trucks also helped because their hardware capabilities allowed for more fuel tables and other parameters.

I would say that talking with Calibrated is a good call. Nick knows way more than I do. If you are looking to delete then you might want to give Anarchy Diesel or Higher Power Performance. Either one will help you find what you are looking for. You may still be able to add power to your Aisin and just adjust how you drive with the added power. Some people say it bucks a lot with added power, and others say it is fine.

ShinerBock wrote:

transamz9 wrote:

ShinerBock wrote:
Off topic, but I am not a big fan of H&S Mini Maxx. Left many any of friends, family, and customers with blown head gaskets if the boost and injection timing is too aggressive and you don't have head studs installed. The other minus is that it doesn't tune the trans to handle the added power reliably like EFI Live, EZLynk, or MM3 does.

Can't tune the aisin so what do you suggest for my 16 Cummins? I'm talking to Calibrated Power through emails now about it. I've run my 2005 on extreme 100 % of the time towing heavy or not close to 10 years now and the engine has never had a hiccup and the stock factory trans is still pulling great but I've heard the aisin dont like added power.

The combination of a VG turbo that creates high drive pressure and the longer stroke of the 6.7L makes it a lot easier to blow a head gasket with aggressive timing and boost. Heck even in stock form this happened until Cummins reprogrammed the engine to not create so much low rpm cylinder pressure. The new ECM's of the 2013 and up trucks also helped because their hardware capabilities allowed for more fuel tables and other parameters.

I would say that talking with Calibrated is a good call. Nick knows way more than I do. If you are looking to delete then you might want to give Anarchy Diesel or Higher Power Performance. Either one will help you find what you are looking for. You may still be able to add power to your Aisin and just adjust how you drive with the added power. Some people say it bucks a lot with added power, and others say it is fine.

Nope, getting old and like the quietness of my truck. I'm wanting to tune with exhaust fully intact.