My new (used) TC - a couple more questions...
Just got around to taking a picture & then figuring out how to upload it, I hope this'll work: It's an old Palomino Bronco Mini L probably from the late 80s? I know Palomino doesn't have ...
Forum Discussion
Thanks for the advice everybody, it is much appreciated!
I'm going to HD today so I will look for those hi density foam sheets
It actually came with 2 manual Reico Titan jacks, one on each side, on different sides of the COG. When we got the camper they were set in about 6 inches of mud, but still worked ok. Eventually I want to get atleast 1 more (though ideally have 4 on the corners) but for just lifting it up a little to replace the riser they should work fine.
Thanks again for all the tips, this forum is extremely helpful. I should be getting my replacement crank anyday now, will post an update once I finally get it popped up!
I'm going to HD today so I will look for those hi density foam sheets
It actually came with 2 manual Reico Titan jacks, one on each side, on different sides of the COG. When we got the camper they were set in about 6 inches of mud, but still worked ok. Eventually I want to get atleast 1 more (though ideally have 4 on the corners) but for just lifting it up a little to replace the riser they should work fine.
Thanks again for all the tips, this forum is extremely helpful. I should be getting my replacement crank anyday now, will post an update once I finally get it popped up!
