Lithium is already bought.
I do believe I measured the wheel wells right. The rear end of the truck unloaded was way high. Definite slope up.
We are not using their prewire at all. They were going to put in 2 runs, one each side, but only did one, not sure what gauge, looks fat but most is insulation. We will probably take all that wiring out if possible. We will be doing 8AWG MC4 extensions to junction inside top fridge comp. to 4AWG to 2 controllers. 2x160W in parallel to one, 2x160W parallel to 2nd controller. 2/0 to batts, 2/0 to inverter. I know there will probably be 100 comments or suggestions, but this is what will best for our situation...I hope! Arrrgggh, generator. Plan to avoid by doing this!!!
Sliding, lighted gen compartment
missing umbrella stand area
coat rack
7cuft dc fridge, little smaller footprint that left enough space above for more storage
extra cushion
footrest down
foot rest up
wardrobe instead of shelf driver side
general messy view of inside
