I did make sure that the front returned to the unhitched height. This was kind of a struggle, the hitch head cam is on #5 and there are 6 links on the arms, Originally it was 6 on one side and 7 on the other because when I go 6 and 6 the passenger side is 1/16" to 1/8" lower than when started but when it is on 7 and 6 it is 1/4" too high on the passenger side but perfect on drivers side. 7 and 7 I am too high on both sides, I tried changing the cam but at 4 and 6 I am either too long or too short. The bars are horizontal and do not bind at 6 and 6.
I drove it with the 6 and 7 and it seemed to pull to one side, so I went to 6 and 6 and it pulled straight, will 1/16 or 1/8" under matter on the front end? It was weighed with 6 and 6.
Next time i will weigh the axles separatly.
Thanks
Bill