Torklift Tie Downs for a 2013 Ram 3500

Just ordered mine this afternoon. I ordered set D3109 for the rear and set D2123 for the front.

Now I need to find a home for the old ones.

Butch50 wrote:

Mello Mike wrote:

Butch50 wrote:
Mike, unless Torklift just added it to their inventory they don't make a front tie down when you have full length running boards, only for cab length. That is what I have on mine so the setup would be different. On the rears I have the Torklift Super Hitch so mine fit right into the end of the Super Hitch. So sorry can't really help out much. You might want to call Torklift to see if they are in the process of making some for the fronts to be used with the full length boards. I know from the Cummins Forum one member is trying to be Torklifts for his front with full length boards right now. I suggested he contact Torklift also. Maybe if both call they would start working on them.

Congrats on the new truck. I really like mine also but it isn't as clean as yours is right now. :B

Crap!! I guess since my running boards extend two inches beyond the cab it's considered full length. Might have to go with after market running boards.

Mike, My first glance at your truck I thought you had full length running boards. My mistake upon looking at your picture closer and figuring in the angle of the picture I see that you only have what is considered cab length.:S My front tie downs are mounted about 6" back from the back of the cab. Mine are on a 8' bed dually though. I also have cab length boards.

Sorry for the panic. :E

No worries! In the picture it looks they are full length, but they are actually cab length. They do extend about an inch which shouldn't be an issue.

Mello Mike wrote:

Butch50 wrote:
Mike, unless Torklift just added it to their inventory they don't make a front tie down when you have full length running boards, only for cab length. That is what I have on mine so the setup would be different. On the rears I have the Torklift Super Hitch so mine fit right into the end of the Super Hitch. So sorry can't really help out much. You might want to call Torklift to see if they are in the process of making some for the fronts to be used with the full length boards. I know from the Cummins Forum one member is trying to be Torklifts for his front with full length boards right now. I suggested he contact Torklift also. Maybe if both call they would start working on them.

Congrats on the new truck. I really like mine also but it isn't as clean as yours is right now. :B

Crap!! I guess since my running boards extend two inches beyond the cab it's considered full length. Might have to go with after market running boards.

Mike, My first glance at your truck I thought you had full length running boards. My mistake upon looking at your picture closer and figuring in the angle of the picture I see that you only have what is considered cab length.:S My front tie downs are mounted about 6" back from the back of the cab. Mine are on a 8' bed dually though. I also have cab length boards.

Sorry for the panic. :E

portscanner wrote:
On a Ram 2011 the rear ones bolt to the frame UNLESS you get a superhitch, then it bolts to the superhitch. Plan ahead and save money - if you plan on getting a superhitch - get it now (unless you want to buy the rear tiedowns twice)

Thanks. I'll be staying with the factory hitch.

Butch50 wrote:
Mike, unless Torklift just added it to their inventory they don't make a front tie down when you have full length running boards, only for cab length. That is what I have on mine so the setup would be different. On the rears I have the Torklift Super Hitch so mine fit right into the end of the Super Hitch. So sorry can't really help out much. You might want to call Torklift to see if they are in the process of making some for the fronts to be used with the full length boards. I know from the Cummins Forum one member is trying to be Torklifts for his front with full length boards right now. I suggested he contact Torklift also. Maybe if both call they would start working on them.

Congrats on the new truck. I really like mine also but it isn't as clean as yours is right now. :B

Crap!! I guess since my running boards extend two inches beyond the cab it's considered full length. Might have to go with after market running boards.

Mike, unless Torklift just added it to their inventory they don't make a front tie down when you have full length running boards, only for cab length. That is what I have on mine so the setup would be different. On the rears I have the Torklift Super Hitch so mine fit right into the end of the Super Hitch. So sorry can't really help out much. You might want to call Torklift to see if they are in the process of making some for the fronts to be used with the full length boards. I know from the Cummins Forum one member is trying to be Torklifts for his front with full length boards right now. I suggested he contact Torklift also. Maybe if both call they would start working on them.

Congrats on the new truck. I really like mine also but it isn't as clean as yours is right now. :B

On a Ram 2011 the rear ones bolt to the frame UNLESS you get a superhitch, then it bolts to the superhitch. Plan ahead and save money - if you plan on getting a superhitch - get it now (unless you want to buy the rear tiedowns twice)

hedge wrote:
When i was in your situation i looked up the part number for the truck on the torklift site and then googled the part number to find the install manual and that was useful to see how the mounted

Great idea! I'll give that a try.

When i was in your situation i looked up the part number for the truck on the torklift site and then googled the part number to find the install manual and that was useful to see how the mounted