Curious how some of you manage your power cord / tether. When I picked up my rig at the dealer last August, they simply tied the excess (which was dragging on the ground) to the stabilizer bar with a very small bungee cord. This works ok; however, I have lost my bungee cord and the power cord has chafed on the hitch when making extreme turns.I was wondering if there is an accessory that serves as a sling of sorts, keeping the belly from dragging on the ground while providing the truck / trailer freedom to make tight turns.Thank you in advance.

Just buy a large, heavy duty zip tie and secure the power cord to the frame leaving enough length so it doesn't bind when turning. Mine is secured back by the coach, long enough not to bind on turns but isn't long enough to sag and hit the ground.

matt_r wrote:When I picked up my rig at the dealer last August, they simply tied the excess (which was dragging on the ground) to the stabilizer bar with a very small bungee cord.That's a pretty haphazard solution ... I'd simply dress the cable out to the length needed and use nylon cable ties to secure the excess to trailer frame.

I tied my some of my cable to the frame with nylon rope. If you use zip ties, use a few and watch them as the plastic becomes brittle over time in direct sun.

I loop it up and around the tongue jack to take up the excess.

i bought a tongue lock that had a hasp large enough to out my cord in when locked and it keeps it on top and out of the way. Works great

Trailer lights power cord / tether | Good Sam Community

pawpaw47
Explorer
Jul 17, 2015
beemerphile1 wrote:
I loop it up and around the tongue jack to take up the excess.

x2
pawpaw47
Explorer
Jul 17, 2015
beemerphile1 wrote:
I loop it up and around the tongue jack to take up the excess.

x2
mhardin
Explorer
Jul 15, 2015
I use a bunge cord that allows the cable to lengthen or shorten depending on the current need.
wrenchbender
Explorer
Jul 15, 2015
I converted all my trailers to curl cords 5 yrs ago.I terminated the old wiring at a terminal strip
trail-explorer
Explorer
Jul 13, 2015
beemerphile1 wrote:
I loop it up and around the tongue jack to take up the excess.

That's what I do as well. All my camping friends do it too.

It's by far the easiest solution.
BubbaChris
Explorer
Jul 13, 2015
Iraqvet05 wrote:
I tied my some of my cable to the frame with nylon rope. If you use zip ties, use a few and watch them as the plastic becomes brittle over time in direct sun.

The Lowes near me stocks a UV rated outdoor line of zip ties - They're black rather than white/natural. I'm using them to hold up my fence-post stinky slinky holder. But even with them being UV rated, I added a few more this year just to be on the safe side.
Bigbird65
Explorer
Jul 13, 2015
beemerphile1 wrote:
I loop it up and around the tongue jack to take up the excess.

Ditto
kearlms
Explorer
Jul 13, 2015
i bought a tongue lock that had a hasp large enough to out my cord in when locked and it keeps it on top and out of the way. Works great
beemerphile1
Explorer
Jul 13, 2015
I loop it up and around the tongue jack to take up the excess.
Iraqvet05
Explorer
Jul 13, 2015
I tied my some of my cable to the frame with nylon rope. If you use zip ties, use a few and watch them as the plastic becomes brittle over time in direct sun.

Forum Discussion

Trailer lights power cord / tether

About Travel Trailer Group

Related Content

Trailer Lights

Trailer lights

New Trailer traveler - light weight, single

Outside camping lights

Scare light