Happijac lubrication

Thanks. This was very easy and helpful. Didn’t take long to take apart clean and lube and put back together. Warning, the plastic cap opposite the switch broke when I was disassembling. I found a nylon bushing at the hardware store that will work to replace that. There is a 1 5/16” rubber o-ring on top of the leg. Mine had tore apart. I’m not sure where it belongs but I looks like it fits into a groove on the top of the leg. Maybe for a bump stop when the leg is all the way in the up position. Other than that all went well. I found son bevel gears on etrailer and wiring junction boxes at Lippert Componets Lci1.com if anyone is needing these items. Good luck.