as looking for a used truck, about 3 years oil, I noticed under rear very clean, the break lines looked as if they were new with clean tages, on them, and weld seams had rust on them, like new rust. Also inside the tail pipe was clean with rust spo...
Bad move, let someone borrow my tow dolly and bent he plate the front tires sit on, I removed the plate (had to cut the 1" bolt off) and repaired the plate, have a new bolt and lock nut. Someone told me to put grease on two pads the plate slides on,...
I need to replace my awning on our Motor home (made a bo-bo and destroyed it) I'm going to install a manual awning instead of ele. First quote I received (not from a dealer) was $743.98 for roller and fab. And $347.98 for awning arm and hardware a...
I'm in no hurry, but looking at used (2016 and up) F150's, looking at eng. size and wondering what would be best a 3.5 Ecoboost or a 5.0 L V8 . to pull a 7000lb trailer (TT) I think I"m leaning towards the V8, to pull over hills in Maine. ...
Did it once 900 mi., would not do it that long again. Bounced all over the place. If you do drive with it empty, stop and check hitch hook up, mine droped a bolt and it almost came apart at 500 mi. Not trying to scare you but be careful, I stayed...
Happned to me once, just missed my foot, no time to react it came down so fast. Jack wwas up to its max when it fell. Best to be arms length when pushing butten or crsnking. Mby there should be a warning on the lift.
I don't know if this the same thing but my MH sounded like symbols. It was the shields , I bought "S" strips, cut and drilled holes pushed them all around the edge of the shields, screwed self taping screws in and that was it. Hope his helps.
