labren
Explorer
Joined 11 years ago
User Profile
User Widgets
All Activity
Switching light electric to heavy electric setting
2014 Ram 3500 6.7 Cummins. So far I am unable to get the controller to stay in the heavy electric setting, it quickly jumps back to the light electric setting. I wonder if any of you have experienced that or have any ideas what it could be? Regards1.2KViews0likes4CommentsSolar Panel (Flexible)
Would there be any of you that have "Flexible Solar Panels" installed or have researched them? I know they are 135W or less and I have found nothing higher, but I would be interested in your comments on them as compared to the aluminum frame - glass insert (original) style. Comments appreciated!1.5KViews0likes9CommentsRe: Equalize Batteries
There is a factory battery disconnect switch that is on this cougar 5th wheel, so I can easily engage that switch to protect the equipment inside, I should think that would work. As "manual operation was also mentioned the voltage could be set specifically for battery type and then initiated. A good point about using shorepower to do this, because of the consistent voltage and time required. Thank you,495Views0likes0CommentsEqualize Batteries
This is a question I must ask and some of you may know the answer, because I don't. * If I had a RV Controller that had the ability to equalize deep cell batteries and at the same time a solar charge controller and an inverter...that all had the ability to equalize batteries * will they all work against each other to do this task, or are we to have only one of these set to do that job? I hope someone knows Thank you,2.4KViews0likes15CommentsSun Blocker (screen)
Recently I have noticed a few screen sun blockers in camp sights. They look very well made and are usually black, appear to be good quality. Unfortunately I do not know the brand name and wonder if one of you might have that information or any comments on this product. Thank you kindly,3.1KViews0likes10CommentsRe: pullrite capture plate
Old-Biscuit wrote: labren wrote: Thank you for your replies..... my model is a #2700 .... but looks totally different than the picture posted. I have also read all through the manual with no directions, so I will contact pullrite on Tuesday if no other poster has seen this before. Thanks again Did you check out the LINK I posted. :H Has the various capture plates and their installation manuals listed/shown under 'related products' Yes thank you, I missed that part the 1st time around. It is a 3365 capture plate, and the instructions say to tighten the set screw nut up to the wedge, which is the way I have been installing this. I am enquiring on this because it has fallen off twice as I mentioned, but also lately there is this crazy squeak noise coming from the hitch I think....as I drive. Difficult to pinpoint when driving. Have any of you heard this from your super glide?642Views0likes0Comments
Groups
Fifth Wheel Group
Interested in fifth wheels? You've come to the right spot.Feb 18, 202519,006 Posts Full Time RVers
Thinking about becoming a full-time RVer? Ask the experts.Dec 28, 20241,587 Posts Travel Trailer Group
Prefer to camp in a travel trailer? You're not alone.Feb 18, 202544,025 Posts
