pjyates100
Explorer
Joined 10 years ago
User Profile
User Widgets
All Activity
Re: Refer problem
Thank you Rambo. Chris, I'm getting power to the refer because when I turn the switch off and then back on, the lights come on. They stay on (lights on are "auto", "ac", and "temp") until I switch it to gas and then all lights go off (including the light inside the refer). I have a 3 amp and a 5 amp fuse in the back. I'm going to replace both of them. The board is not encased in compound. Thanks for your comments. Any other ideas are appreciated!298Views0likes0CommentsRefer problem
Refer was working fine on gas. I connected it to ac and it worked fine. When I disconnected the ac, it did not automatically switch to gas. When I try to do it manually with the switch, the gas light comes on for a second and then 12 volt power shuts off. Switch control lights and interior light go off. Turn it back to ac and it works fine. I've tried this several times with the same results.. I have a 1995 domestic model RM2811. Any suggestions would be appreciated.897Views0likes6Comments
Groups
