jimhutch
Explorer
Joined 11 years ago
User Profile
User Widgets
All Activity
Re: Road surface transfer to steering wheel
The tires are new. Just had them changed a month ago. I will get the coach weighed within the next couple weeks. Then adjust the PSI and hope that works. I'll let you know the results. Thanks everyone for all your suggestions. Enjoy your day. Jim310Views0likes0CommentsRoad surface transfer to steering wheel
I just bought a 2007 Damon Outlaw (Workhorse W24) with less than 12,000 miles on the odometer. I installed a Safe-t-Plus steering control (Blue) and that seems to take care of the wandering problem. I still feel that I am getting a lot of road surface bumps transferred to the steering wheel. Any idea what would cause this and is there a fix. I don't overload the coach and I run 100 psi in the front tires. Ideas? Comments? Thanks. Jim1.9KViews0likes9CommentsRe: Problems with Xantrex system control panel/Onan generator
Hi Mathew Thanks for your help. I finally called Xantrex. They were most helpful. Their customer service by phone or email was exceptional. Type 2 is the correct setting.(Although from looking at the wiring, I'm sure type 10 would work just as well) The problem was with the wiring. The schematic in the book indicates that wires 16 and 18 are connected internally but aren't. They have to be connected externally to ground wire 13. Simply connecting these 3 wires solved my problem. (So much for professional installation!!!!) Enjoy your day. Jim425Views0likes0CommentsProblems with Xantrex system control panel/Onan generator
I am new to the motorhome scene. I have a Xantrex system control panel, Onan 5.5 HGJAB genset and Xantrex automatic generator start. The generator will start with the remote switch and the switch at the generator, but it will not start using the system control panel. The message I get is W-202 (the auto gen start tried but could not start the generator.) The generator did not turn over. The system control panel/auto gen start was installed by the previous owner but he never used the system control panel to control the generator. Is there something simple I am missing? or???? Thanks Jim2.8KViews0likes11Comments
Groups
Motorhome Group
Join in here to discuss all things motorhomes.Jul 17, 202538,735 Posts
