I have a new 2015 f150 that I am setting up to tow behind the motorhome, previously I towed a saturn vue and used the bulb and tail light set Blue Ox BX8869. I like the simlicity of having the towing lights seprate from the regular lights, but I am ...
I am debating getting a cover for my sightseer. I currently park under some pine trees and am getting tired of climbing on the roof every couple months to remove the pine sap before it hardens too much. What are peoples experiences with covering the...
I added leveler air springs to mine, fixed the lean... about $1000 for all the parts including the onboard compressor. it was not a difficult job to put in if you can remove wheels and drill holes.
I carry a honda 1000 along with my onan, if I need AC or microwave I will run the big generator, but if I just need to charge my batteries after a few days I will pull out the honda and let it run for an afternoon.
I have been drilling the hole bigger with a 3/4 forstner bit (carefully) to the depth of the back wall but not into the back wall (slightly longer than the screw you removed usually) then installing a 3/4 dowel into the hole using a polyurethane glue...
